Samsung HCL4715W - Manual (Page 51)

C HAPTER F OUR : S PECIAL F EATURES
4.8
S
P E C I A L
F
E AT U R E S
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Depending on the particular program being broadcast, you can listen to stereo, mono, or a
Separate Audio Program. (SAP audio is usually a foreign-language translation. Sometimes SAP
has unrelated information like news or weather.)
2
Move the joystick down to
select “MTS”, then move the
joystick to the left or right to
select “Mono,” “SAP,” or
“Stereo.”
Press the Menu button to exit
▼
The text at the bottom of the
menu tells you if the incoming
audio is stereo, SAP, or mono.
▼
Quick way to access the MTS
menu: Just press the “MTS” button
on the remote control.
1
Press the Menu button.
Move the joystick down to
select “SOUND”, then
press the joystick to enter.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose Mono for channels that are broadcasting in mono, or if you are
having difficulty receiving a stereo signal.
• Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
: Sound.
: Only bass of the sound (weak).
: No Sound.
✓ The above table applies to only
softwares, equipments (DVD, VCR,
etc.) or broadcasting signals cover-
ing Dolby Surround Output.
Dolby Surround Output Table (Output connector and signals)
Mode
Normal
Wide
Phantom
Off
Playback/Broadcast
Signal
Mono
Stereo
Mono
Stereo
Mono
Stereo
Mono
Stereo
Left Output Right Output Center Output Surround Output
(left and right)
01509D(E)-CHAPTER 4 2004/10/19 09:22 AM Page 8