Samsung SWF-P10 - Manual (Page 8)

Washing a Load of Laundry
6 SAMSUNG Washing Machine Owner’s Instructions
Overview of the control panel
1. Detergent dispenser
2. Display panel
Displays the remaining wash cycle time, error messages.
3. Temperature selection button
Press the button repeatedly to cycle through the available water temper-
ature options (cold water, 30°, 40°, 60° and 95° C).
When press this button during washing, you can see the selected tem-
perature on display panel.
4. Spin selection button
Press the button repeatedly to cycle through the available spin speed
options [ P12: (0, 400, 600, 800, 1000 and 1200 rpms.) ,
P10: (0, 400, 600, 800 and 1000rpms), P8: (0, 400, 600 and 800 rpms)].
When press this button during operating, you can see the selected the
spin speed on display panel.
5. Delay Start button
Press the button repeatedly to cycle through the available delayed start
options (from 1 hour to 24 hours in one hour increments).
6. Function button
Press the button repeatedly to cycle through the available partial wash
options {Wash+Rinse+Spin ➔ Prewash+Wash+Rinse+Spin ➔ Spin ➔
Rinse(1 time)+Spin ➔ Rinse(2 times)+Spin ➔ Rinse(3 times)+Spin ➔
Wash+Rinse+Spin}.
Note : Prewash is available only for Cotton, Synthetic, Delicate.
“Rinse(3 times)+Spin” is not available when Speedy,Eco course.
7. Fuzzy Control dial
Turn the dial to select one of the six available wash programs (Eco,
Speedy, Wool, Delicate, Synthetic or Cotton).
8. Start/Pause button
Press to pause and restart programs.
9. Door Open button
Press to open the washing machine door.
10. (On/Off) button
Press once to turn the washing machine on, press again to turn the wash-
ing machine off. If the washing machine power is left on for longer than
10 minutes without any buttons being touched, the power automatically
turns off.
o C
rpm
Min
Fuzzy control
Temp Spin Delay Start Function
Door open
Spin Fault Check
Remaining Time
Delay Start
Rinse
Wash
Pre-wash
Eco
Speedy
Wool
Delicate
Synthetic
Cotton
2 1 3 4 5 6 7 8 10 9