Installing the speakers on a wall – Sony BDV-T57 User Manual

Page 16

Advertising
background image

16

US

Gettin

g

Star

ted

To add the optional surround back speakers

You can enjoy 7.1 surround sound by purchasing the Wireless Surround Speaker Kit (WAHT-SBP2,
optional). The optional product lineup differs depending on the area.

For the position of the surround back speakers, refer the illustration below (

C

).

Note

• To use the surround back speakers, set [Surround Back] (page 52) in [Speaker Settings] to [Yes] while performing

the Easy Setup (page 28).

Caution

• Contact a screw shop or installer regarding the wall material or screws to be used.

• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach

the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.

• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or

improper screw installation, natural calamity, etc.

Before installing the front speakers of BDV-E870 on a wall, you need to disassemble the speakers. You
can install the upper part of the speakers on a wall.

Installing the speakers on a wall

45

45

30

30

C

C

Front left speaker (L)

Front right speaker (R)

Center speaker

Subwoofer

Surround back right speaker (R)
(optional)

Surround back left speaker (L)

(optional)

Surround left

speaker (L)

Surround right
speaker (R)

Advertising
This manual is related to the following products: