External audio device, Using an s-air product, Inserting the wireless transmitter/transceiver – Sony BDV-T57 User Manual

Page 44: E 44), About s-air products

Advertising
background image

44

US

Using an S-AIR Product

When you purchase the S-AIR product, you
need to perform the following settings to
activate wireless transmission.

About S-AIR products

There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for

transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)

• S-AIR sub unit: This is for receiving sound.

Surround amplifier (optional): You

can enjoy surround speaker sound
wirelessly.

S-AIR receiver (optional): You can

enjoy system sound in another room.

To make use of the S-AIR function, you need to
insert the wireless transmitter into the unit and
the wireless transceiver into the S-AIR sub unit.

Note

• When you insert the wireless transmitter/transceiver,

make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).

• Do not touch the terminals of the wireless transmitter/

transceiver.

To insert the wireless transmitter
into the unit

1

Remove the screws directly below the

mark.

Note

• Remove the screws that are indicated in the

illustration. Do not remove other screws.

2

Insert the wireless transmitter.

Note

• Insert the wireless transmitter with the S-AIR

logo facing up.

• Insert the wireless transmitter so that the V

marks are aligned.

• Do not insert anything other than the wireless

transmitter into the EZW-T100 slot.

External Audio Device

Inserting the wireless
transmitter/transceiver

S-AIR sub unit

(surround amplifier)

S-AIR main unit

S-AIR sub unit

(S-AIR receiver)

(not supplied)

Room A

Room B

EZW-T100

EZW

-T100

Rear of the unit

EZW-T100

EZW

-T100

Rear of the unit

Advertising
This manual is related to the following products: