Connecting or disconnecting implement safety, Safety – Servis-Rhino FR162 User Manual

Page 15

Advertising
background image

SAFETY

FR240-FR162 01/11

Safety Section 1-5

© 2011 Alamo Group Inc.

SAFETY

CONNECTING OR DISCONNECTING IMPLEMENT SAFETY

TO AVOID SERIOUS INJURY OR DEATH FROM BEING CRUSHED BY TRACTOR OR
IMPLEMENT:

WHEN BACKING

tractor to implement hitch:

•

DO NOT ALLOW BYSTANDERS between tractor and implement.

BEFORE

connecting and disconnecting implement hitch:

•

STOP TRACTOR ENGINE, place transmission into park, engage parking brake and remove key.

WHEN

connecting and disconnecting implement hitch:

•

DO NOT crawl or walk under raised mower or wing.

•

USE tongue JACK to lift heavy implement tongues to control implement tongue movement.

•

AVOID overloading jack to prevent jack failure and injury.

(Refer to Instructions in Operation Section)

WHEN CONNECTING IMPLEMENT DRIVELINE:
TO AVOID

implement driveline coming loose during operation:

•

LUBRICATE yoke spring locking collar to ensure it freely slides on PTO shaft.

•

SECURELY seat yoke locking balls in PTO shaft groove.

•

PUSH and PULL DRIVELINE on both the tractor and implement PTO SHAFTS to ensure it is SECURELY
ATTACHED.

TO AVOID

broken driveline during operations:

•

CHECK driveline for proper length between PTO shaft and implement gearbox shaft.

(Refer to Instructions in Operation

Section)

•

Drivelines too short can pull apart or disengage.

•

Drivelines too long can bottom out.

•

Bottoming driveline telescoping assembly will stop sliding and become solid.

•

Driveline bottoming can push through support bearings and break off PTO shaft.

CONTACT DEALER

if implement driveline does not match Tractor PTO shaft:

•

DO NOT USE PTO ADAPTER.
Using a PTO adapter can cause:

•

Excessive vibration, thrown objects, blade and implement failures by doubling operating speed.

•

Increased working length exposing unshielded driveline areas and entanglement hazards.

BEFORE REMOVING WING RETAINING LOCKS:
•

ATTACH hoses to tractor.

•

FILL Wing Cylinders with oil. (R

efer to Instructions in Operation Section)

•

KEEP bystanders clear of area before operating wings.

•

LOWER WINGS slowly and carefully.

DO NOT connect the Mower to a tractor with the PTO directly connected to the Tractor transmission.

PN CD01

Advertising
This manual is related to the following products: