Settings for sound (audio setup), Settings for speakers (speaker setup) – Sony DAV-S300 User Manual

Page 49

Advertising
background image

49

Settings and Adjustments

Settings for Sound (AUDIO
SETUP)

Select “AUDIO SETUP” after pressing DVD SETUP.
“AUDIO SETUP” allows you to select the sound track.
The default settings are underlined.

x

TRACK SELECTION

Gives the sound track which contains the highest number
of the channels priority when you play a DVD on which
multiple audio formats are recorded. If multiple audio
channels are recorded in PCM, DTS or Dolby Digital
format, the higher-numbered channel audio recorded in
PCM, DTS or Dolby Digital format is played.
• OFF : No priority given.
• AUTO : Priority given.

Notes

• When you set this item to “AUTO,” the language may change

depending on the “AUDIO” settings in “LANGUAGE SETUP.”
The “TRACK SELECTION“ setting has higher priority than
that of “AUDIO” settings in “LANGUAGE SETUP” (page 44).

• If PCM, DTS and Dolby Digital sound tracks have the same

number of the highest channels, the system selects PCM, DTS
and Dolby Digital sound tracks, in this order.

• Depending on the DVD, the audio with priority may be

predetermined. In this case, you cannot give priority to the
DTS or Dolby Digital format by selecting “AUTO.”

Settings for Speakers
(SPEAKER SETUP)

Select “SPEAKER SETUP” after pressing DVD SETUP.
To obtain the best possible surround sound, first specify
the distance of the speakers from your listening position,
then set the balance and level. Then use the test tone to
adjust the speaker volumes to the same level.

x

SIZE

When you do not connect center or rear speakers, or move
the rear speakers, set the parameters for CENTER and
REAR. Since the front speaker and subwoofer settings are
fixed, you cannot change them. The default settings are
underlined.
• FRONT

— YES

• CENTER

— YES: Normally select this.
— NONE: If you will not connect a center speaker,

select this.

• REAR

— BEHIND (LOW), BEHIND (HIGH), SIDE (LOW),

SIDE (HIGH): Specify the position and height to
implement the Digital Cinema Surround modes in
the “Virtual Multi Dimension” sound field (p. 20)
properly.

— NONE: If you will not connect a rear speaker, select

this.

• SUBWOOFER

— YES

Notes

• When you select an item, the sound cuts off for a moment.
• Depending on the settings of other speakers, the subwoofer

may output excessive sound.

AUDIO SETUP

TRACK SELECTION:

To set, press , then .
To quit, press .

OFF

ENTER

SETUP

.

DVD SETUP

SPEAKER SETUP

SIZE:
DISTANCE:
BALANCE:
LEVEL:

OFF

TEST TONE:

FRONT:
CENTER:

YES

BEHIND(LOW)

YES

YES

REAR:
SUBWOOFER:

To set, press , then .
To quit, press .

ENTER

SETUP

.

DVD SETUP

Advertising
This manual is related to the following products: