Sanyo AVL-3210 - Manual (Page 19)

Memorizing the Channels
Your TV can memorize and store all of the available channels. After the available channels are memorized, use CH+/- to scan
through the channels.
17
Before you start
AUTO SCAN, it is necessary to specify the type of signal source that is
connect to the unit.(i.e., an antenna or cable system).
Selecting the TV Source
Press to .
In
AIR mode, the set receives antenna signal.
In
CABLE mode, the set receives cable TV program.
3or4 select
AIR or CABLE item 3
Press
MENU to display the menu main page. 1
Press repeatedly to select menu, and press to access.
item .
3or4 TV-CHANNEL 6
Then the [
SOURCE] will be highlighted automatically
2
Press
MENU button repeatedly to exit. 4
Searching Channels Automatically
Press
3
to . or4 begin the auto channel search
The unit will begin memorizing all of the available channels.
Note:
During the process of the Auto Scan, you can press MENU button
to stop the search.
1 Navigate to the
TV-CHANNEL
menu, and highlight
AUTO SCAN item.
2
SCAN
178.25 MHZ CH 8 178.25 MHZ CH 8
TV - CHANNEL
：SEL ：ADJ ：EXIT
SOURCE
CHANNEL
ADD/ERASE
AUTO SCAN
FINE TUNE
CABLE
29
MENU
ADD
TV - CHANNEL
：SEL ：ADJ ：EXIT
SOURCE
CHANNEL
ADD/ERASE
AUTO SCAN
FINE TUNE
CABLE
29
MENU
ADD
The skipped channels can not be selected by using CH+/- buttons unless you use
number buttons to input channel number directly.
Skipping Channels
Use 3
or 4 to select ADD or ERASE.
When the item is set to
ERASE, the selected channel will be skipped.
When the item is set to ADD, the selected channel will not be skipped.
3 Press to select
ADD/ERASE item.
6
4
5 Press
MENU button repeatedly to exit.
1
Navigate to the
TV-CHANNEL
menu, and highlight
CHANNEL item.
TV - CHANNEL
：SEL ：ADJ ：EXIT
SOURCE
CHANNEL
ADD/ERASE
AUTO SCAN
FINE TUNE
CABLE
29
MENU
ERASE
2 Press
3 or4to select a channel you want to skip.
Manual Fine Tuning
Select a channel you want to perform fine tuning.
1
Navigate to the TV-CHANNEL menu, and 5 6 repeatedly press or to
select
FINE TUNE item.
2
3
Press 3 or 4
to start the fine tune till the best possible picture and
sound are obtained.
TV - CHANNEL
：SEL ：ADJ ：EXIT
SOURCE
CHANNEL
ADD/ERASE
AUTO SCAN
FINE TUNE
CABLE
29
MENU
ADD
FINE TUNE
224 . 25 MHz