Sony CFD-G70 - Manual (Page 15)

15 GB
The CD Player
1
Press x.
“Cd” appears in the display.
2
Press MODE until “PGM” appears in
the display.
3
Press the . or > to select the
track you want to programme, and press
DISPLAY ENT•MEMORY.
Repeat this step.
4
Press u to start programme play.
Creating your own
programme
(Programme Play)
You can arrange the playing order of up to
20 tracks on a CD.
x
MODE
u
On the remote
1 Press x.
2 Press MODE until “PGM” appears in the
display.
3 Press the number buttons for the tracks you want
to programme in the order you want.
4 Press N.
To cancel Programme Play
Press MODE until “PGM” disappears from
the display.
To check the order of tracks
before play
Press DISPLAY ENT•MEMORY.
Every time you press the button, the track
number appears in the programmed order.
To change the current
programme
Press x once if the CD is stopped and twice
if the CD is playing. The current programme
will be erased. Then create a new
programme following the programming
procedure.
Tips
• You can play the same programme again, since
the programme is saved until you open the CD
compartment.
• You can record your own programme. After
you’ve created the programme, insert a blank
tape and press z to start recording.
DISPLAY ENT
MEMORY
. , >
Programmed
track Playing order