Sony KP-41S5U - Manual (Page 18)

– 18 –
KP-41S5/41S5B/41S5G/
41S5K/41S5R/41S5U
RM-862
2-10. CHASSIS BLOCK REMOVAL
1 Two screws
(+ BVTP 4X16)
2 Control panel assembly
3 Three connectors
4 Four connectors
5 Screw
(+ BVTP 4X6)
6 Resister (High voltage)
1 Two screws
(Hexagon head)
3 Set the main
bracket.
2 Pull the main bracket, and
remove each connectors on main bracket.
1 Six screws
(Hexagon head) 2 Pull out the
chassis block.
(3) CHASSIS BLOCK REMOVAL (1) H1, H2 BOARDS AND AND RESISTOR
REMOVAL
(2) MAIN BRACKET REMOVAL
Pull out the chassis block by gripping the handles as shown
in the diagram.
At this time, pay particular attention to the components
removed in (1).
Pay particular attention to the wires of each Printed circuit
boards when puling out the main bracket.