Recording from external equipment you are watching, Copying from a camcorder (dvd-r130, r131 only) – Samsung DVD-R130 User Manual

Page 43

Advertising
background image

English -

43

R

ecording

5

Press the

REC

button

.

To pause recording

Press the

PLAY/PAUSE(

)

button to pause a

recording in progress.

●

Press the

PLAY/PAUSE(

)

button again to resume

recording.

●

You can switch channels by pressing the

PROG

(

/

)

buttons while recording pauses.

To stop recording

Press the

STOP

button to stop or finish a recording in

progress.

●

When using DVD-RW/DVD-R discs, the message
‘Updating the disc information.
Please wait for a moment.’ is displayed.

Recording from external
equipment you are
watching

Check that the disc has enough available space for the
recording. Adjust the recording mode.

1

Press the

OPEN/CLOSE

button, place a

recordable disc on the disc tray.

2

Press the

OPEN/CLOSE

button to close

the disc tray.

Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is used, whether to
initialize or not will be asked first. (See page 40)

3

Press the

INPUT SEL.

button to select the

input source according to the connection
you made.

The front panel display changes in the following
sequence: (DV input is display only DVD-R130, R131)

➞

PR Number

➞

AV1

➞

AV2

➞

AV3

➞

DV

If you connect a digital camcorder, press the

INPUT SEL.

button to select

DV

.

(See pages 43-44)

4

Press the

REC MODE

button repeatedly,

(or press the

REC MODE

button, then

press the …† button) to select the
recording speed(quality).

➞

SP

➞

LP

➞

EP

➞

XP

Before you start

■

You can not change the recording mode
while recording or Pause.

■

Recording will stop automatically if
there is no free space left for recording.

■

Up to 99 titles can be recorded onto a
disc.

■

Recording will stop automatically if a
copy protected image is selected.

■

DVD-RW discs must be
formatted before starting to record.
Most new discs are sold unformatted.

■

Do not use DVD-R authoring discs with
this DVD Recorder.

NOTE

Copying from a
Camcorder (DVD-R130,
R131 only)

You may control the Camcorder using the IEEE1394
(DV) interface.

Check that the disc has enough available space for
the recording. Adjust the recording mode.

1

Press the

OPEN/CLOSE

button, place a

recordable disc on the disc tray.

Before you start

Record Mode

SP (02:12)

01003E-R128,130-EUR_41~48 3/10/06 3:53 PM Page 43

Advertising
This manual is related to the following products: