Sony FCB-IX11A - Manual (Page 15)

15
Basic Functions
Initial Settings, Custom
Preset and Backup
Initial settings for the various functions of the FCB-
IX11A/IX11AP are indicated in the “Initial settings”
column.
The “Custom preset” column indicates whether the
custom preset function can be used to store the
settings. The function enables the stored settings to be
recalled automatically when the camera is turned on.
The “Standby backup” column indicates whether the
data is preserved even when the camera is powered
OFF. A circle “a” in this column signifies that the
data is preserved. A cross “
×
” signifies that the data IS
NOT preserved.
Mode/Position Initial settings
Custom Standby
preset backup
Zoom Position Wide end a a
D-Zoom On/Off On a a
D-Zoom Separate/Combine Combine a a
D-Zoom Position 00h a a
Focus Position — a a
Focus Auto/Manual Auto a a
Near Limit Setting 8000h (40cm) a a
AF Sensitivity Normal a a
AF Mode Normal a a
AF Run Time 5 sec a a
AF Interval 5 sec a a
WB Mode Auto a a
WB Data (Rgain, Bgain) — a a
One Push WB Data — a a
AE Mode Full Auto a a
Slow Shutter Mode Manual a a
Shutter Position 1/60sec (NTSC), 1/50sec (PAL) a a
Iris Position — a a
Gain Position — a a
Bright Position — a a
Exposure Compensation On/Off Off a a
Exposure Compensation Amount ±0 a a
Backlight On/Off Off a a
Spot AE On/Off Off a a
Spot AE Position Setting X=8, Y=8 a a
Aperture Level 5 a a
LR Reverse On/Off Off a a
Freeze On/Off Off
Ч Ч
Picture Effect Off a a
Camera Memory Same as the initial value setting a a
Display On/Off Off a a
Mute On/Off Off
Ч Ч