Adjusting the iris sensitivity, Macrophotography – Sony 370PL User Manual

Page 135

Advertising
background image

Chapter 5

Adjustments and Settings

135

Chapter 5 Adjustments and Settings

You can see the iris sensitivity trimmer when
removing the gum cap on the front of the lens driving
unit. Use a mini-screwdriver to turn the trimmer. If
you turn it clockwise, the sensitivity increases, and if
you turn it counterclockwise, the sensitivity decreases.
It is recommended that you confirm the iris sensitivity
after replacing the lens.

For more information, refer to the operating instructions for
the lens (or consult the lens maker).

Macrophotography

Use the macro function when the subject is less than
about 1.1 m (4 feet) (for the VCL-716BX) from the
front of the lens. It is possible to shoot close-ups down
to a range of 10 mm (wide angle, f = 7.5 mm).

1

Bring the lens up to the subject so that the image is
the required size.

2

Move the focusing ring to the closest focus
position.

Lens for DSR-370/370P (

1

/

2

-inch type)

Product

Fujinon: VCL-714, S16X6.7B
Canon: YH18X6.7KRS, VCL-719BX

Fujinon: S15X6.1BE, S16X6.7BE,

S19X6.5B, S19X6.5BE, S20X6.1BE

Canon: YH18X6.7IRS, H21aX5.8, H15aX6,

H9aX3.8

Fujinon: VCL-716BX

When referring data setting to your Sony
dealer.

Lens for DSR-570WS/570WSP (

2

/

3

-inch type)

If you use the lens that is not mentioned above, set the
lens number as follows:
• When using a lens without an extender, set it to 1.
• When using a lens with an extender, set it to 2.
• When using a lens with a ratio converter, set it to 2.

You can also ask a Sony dealer more precise settings,
according to your lens. In this case, set it to 4.

Adjusting the Iris Sensitivity

When you use the VCL-716BX or VCL-719BX lens,
you usually need not adjust the iris sensitivity because
lenses are equipped with iris sensitivity adjustment
function.
In auto iris mode, if hunting or response delay
happens, adjust the iris sensitivity using the iris
sensitivity trimmer.

Lens number

1

2

3

4

Product

Lens number

Fujinon: VCL-916BYA, A16X9 BRM,

A12X6.8 BRM

Canon: VCL-918BY, VCL-919BY,

YJ18X9B KRS

1

Fujinon: A10X4.8 BEVM/BERD, A15X8

BERM/BERD, A16X9 BERM, A20X8
BEVM/BERD, A19X8.7 BERM, A19X8.7
BRM

Canon: J9aX5.2B IRS/IAS, J15aX8B IRS/

IAS

2

Canon: J21aX7.8B IRS/IAS, YJ18X9B IRS 3

When referring data setting to your Sony
dealer.

IRIS

GAIN

Iris sensitivity trimmer (S
or IRIS GAIN is indicated.)

2

3

1

4

ZOOM

MANU.

SERVO

4

(Continued)

Advertising
This manual is related to the following products: