Figure 56. three level input pins, Si53xx-rm – Silicon Laboratories SI5375 User Manual

Page 105

Advertising
background image

Si53xx-RM

Rev. 1.2

105

7.6. Three-Level (3L) Input Pins (With External Resistors)

Figure 56. Three Level Input Pins

Any resistor pack may be used.



The Panasonic EXB-D10C183J is an example.



PCB layout is not critical.

Resistor packs are only needed if the leakage current of the external driver exceeds the listed currents.

If a pin is tied to ground or Vdd, no resistors are needed.

If a pin is left open (no connect), no resistors are needed.

Parameter

Symbol

Min

Max

Input Low Current

Iill

–30 µA

—

Input Mid Current

Iimm

–11 µA

–11 µA

Input High Current

Iihh

—

–30 µA

Note: The above currents are the amount of leakage that the 3L inputs can tolerate from an external

driver.

External Driver

Si53xx

I

imm

18 k

V

DD

18 k

75 k

V

DD

75 k

One of eight resistors from a Panasonic EXB-D10C183J
(or similar) resistor pack

Advertising
This manual is related to the following products: