Sony KDS-R50XBR1 - Manual (Page 25)

Connecting the TV
25
C
o
n
n
ec
ting t
h
e T
V
KDS-R50XBR1/KDS-R60XBR1
2-637-151-11(1)
D:\WINNT\Profiles\fujii\Desktop\SX_EN_source
_onDT062305\01US04INS.fm masterpage:3 columns Right
Cable Box and
Antenna For best results, use this connection if:
❑ Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑ You do not have a VCR. (If you have a VCR, see pages 36 and 37.)
With this connection you can:
❑ Use the TV’s remote control to change channels coming through the
cable box to the TV’s CABLE input. (You must first program the
remote control for your specific cable box; see “Programming the
Remote Control” on page 48.)
❑ Use the TV’s remote control to change channels coming directly into
the TV’s VHF/UHF input jack.
Notes on Using This Connection
Before connecting a
cable box, see “Using
the CableCARD Device”
on page 32.
IN OUT
CABLE VHF/UHF
CATV cable
Rear of TV
Antenna cable
Cable box
Coaxial
cable
To Do This ... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable
box Program the remote control. See “Programming the Remote
Control” on page 48.
Activate the remote control to operate the cable
box Press SAT/CABLE (FUNCTION) once, and the SAT/CABLE
indicator lights up.
Prevent the accidental switching of TV channels Use the Channel Fix setting to set the channels for the cable box.
See “Accessing the Channel Settings” on page 90.
Switch the TV’s input between the cable box and
antenna
Press ANT to switch back and forth between the TV’s VHF/UHF
(antenna) and CABLE inputs.