Setup reset, Reset all – Samsung 400TS-3 User Manual
Page 143
Note
When there are two or more BMP images, they are displayed on the screen using a slideshow.
•
It is recommended that the playback interval between two BMP images in the slideshow
should be one second. The image extraction probability will decrease with other playback
intervals.
•
A BMP image might not be extracted if it is covered by another image (for example, the mouse
pointer).
3.
If a more recent version than the current software version is detected, you will be asked whether
to upgrade the current software. If you select <Yes>, the upgrade is performed.
4.
When the software upgrade is completed, the product is turned off and on automatically.
Note
•
This only operates with a digital signal, such as in DVI, HDMI1, or HDMI2 mode. (The input
resolution must be identical to the panel resolution.)
•
In HDMI1 and HDMI2 modes, the timing values used for both the PC and TV are only supported
if the Edit Name is set to PC or DVI PC.
•
This is only supported if the Size is set to 16:9.
Setup Reset
Reset all the values for a setting.
Reset All
Adjusting the LCD Display