Sony RDR-GX33 - Manual (Page 42)

42
b Notes
• If a message indicating that the disc is full appears
on the screen, change the disc, or make available
space for the recording (DVD+RW/DVD-RW
only) (page 60).
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite program, turn on the satellite
tuner and select the satellite program you want to
record. Leave the satellite tuner turned on until
the recorder finishes recording. If you connect
equipment with a timer function, you can use the
Synchro Rec function (page 47).
• Even if the timer is set for the same daily or
weekly program, the timer recording cannot be
made if it overlaps with a program that has
priority. “
” will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• The Rec Mode Adjust function only works with a
timer recording. It does not function with Quick
Timer or Synchro Rec.
You can set the recorder to record in
30 minute increments.
Press z REC repeatedly to set the
duration.
Each press advances the time in 30 minute
increments. The maximum duration is six
hours.
The time counter decreases minute by minute
to 0:00, then the recorder stops recording (the
power does not turn off). Even if you turn off
the recorder during recording, the recorder
continues to record until the time counter
runs out.
To cancel the Quick Timer
Press z REC repeatedly until the counter
appears in the front panel display. The
recorder returns to normal recording mode.
You can adjust the recording picture quality
and picture size.
1
Before recording starts, press
OPTIONS to select “Rec Settings,”
and press ENTER.
2
Select the item you want to adjust,
and press ENTER.
The adjustment display appears.
Example: Rec NR
“Rec Mode”:
Selects the recording mode for the
desired recording time and picture
quality. For more information, see
“Recording mode” on page 39.
Using the Quick Timer function
(normal recording)
Adjusting the recording picture
quality and size
</M/m/,,
ENTER
OPTIONS