Sony RDR-GX33 - Manual (Page 81)

81
Se
tti
n
g
s an
d Adj
u
st
m
ent
s
Remote Control Settings/
Factory Settings (Others)
The “Others” setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the
recorder is in stop mode.
2
Select “SETUP,” and press ENTER.
3
Select “Others,” and press ENTER.
The “Others” setup appears with the
following options. The default settings
are underlined.
Power Save Standby
Selects whether this recorder is in power save
mode and adjusts the lighting of the front
panel display.
Command Mode
Changes the Command Mode of the recorder
if other DVD equipment is assigned the same
Command Mode. For details, see “If you
have a Sony DVD player or more than one
Sony DVD recorder” on page 21.
Factory Setup
Allows you to select the setup settings by
group, and return them to their default
settings. Note that all of your previous
settings will be lost.
1
Select “Factory Setup” in “Others,” and
press
, or ENTER.
The display for selecting a group of
settings appears.
2
Select the group of settings you want to
return to default from “Basic,” “Video,”
“Audio,” “Recording,” “DVD,”
“Others,” “Parental Control,” and “All,”
and press
, or ENTER.
3
Select “Start,” and press ENTER.
The selected settings return to their
default settings.
4
Press ENTER when “Finish” appears.
On Sets to power save mode to
make the lighting dark.
Turn off the lighting when the
power is off.
Off Does not set to power save
mode and make the lighting
bright.