Samsung Byline SCH-R310 - Manual (Page 64)

61
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce
the digits again. Wait for the beep and then say the
digits.
Repeat this step until you’re satisfied with the recording.
5. After confirming that the recording sounds “ok”,
continue the recording process with the next set of
digits.
6. After 10 sets of digits, the phone asks whether you want
to do more adaptation. Answer “Yes.”
7. Repeat steps 4 and 5 for another 10 sets of digits. After
the second group of 10 sets of digits, “Adaptation
complete” plays through the speaker and you are
returned to the Digit Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In standby mode, press Menu ➔ Voice SVC ➔ Voice
Settings ➔ Digit Dialing. The following options appear in
the display:
• Adapt Digits
• Reset Digits
2. Highlight Reset Digits, then press . The phone
prompts you to confirm digit reset.
3. Press OK or to reset your digit adaptation, or press
Back or to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1. In standby mode, press Menu ➔ Voice SVC ➔ Voice
Settings ➔ Sound. The following options appear in the
display:
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
• Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone’s audio name
playback.
2. Highlight the desired option, then press .
3. Highlight the desired setting.
4. Press OK or to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.