Step 3: connecting the vcr, Step 4: tuning your tv to the vcr, Connecting the vcr – Sony SLV-ED25PS/TH User Manual
Page 6: Step 3, Connecting the aerial additional connections
6
Getting Started
IN
OUT
AERIAL
OUT
IN
AERIAL
Step 3
AERIAL IN
AERIAL IN
Mains lead
to mains
AERIAL OUT
Aerial cable (supplied)
: Signal flow
1
Disconnect the aerial cable from your TV
and connect it to AERIAL IN on the rear
panel of the VCR.
2
Connect AERIAL OUT of the VCR and
the aerial input of your TV using the
supplied aerial cable.
3
Connect the mains lead to the mains.
Connecting the VCR
Connect the aerial to your VCR and TV as shown below to watch TV
programmes and VCR pictures on your TV. In addition, if your TV has
audio/video (A/V) input jacks, we recommend you connect the VCR to
your TV using an audio/video cable to get a better picture and sound.
Connecting the aerial
Additional connections
To a TV that has audio/video input
jacks
This additional connection improves
picture and sound quality. Connect the
TV as shown on the right.
If you want to use the Trinitron TV
Synchro Play function (see page 21),
this connection is necessary. (If your TV
has two or more inputs, connect the
audio/video cable to the VIDEO IN 1
jacks.)
LINE-1 OUT
LINE IN
Audio/video cable (not supplied)