Erase all, Set active, Erase all set active – Samsung 20040414141622906 User Manual

Page 97

Advertising
background image

97

Erase all

To erase all voice calling entries:

1.

In standby mode, press

to display the main menu.

2.

Press

for

Voice Dial

.

3.

Press

for

Erase All

.

4.

At the voice prompt and screen prompt, press

to confirm that you

wish to

Erase All

of the entries. A screen prompt will display when the

entries have been erased.

5.

Press

at any time to exit without removing any voice entries.

Set active

Voice dialing is always active once you have programmed the phone to accept

voice entries and associated the phone numbers. To place voice activated calls,

press and hold

. Or, if you are wearing the Samsung approved earbud,

press and hold the silver button located above the earbud microphone. After

you hear the voice prompt and the beep, say the name of the person you are

calling into the phone or earbud microphone.

Note: When using the earbud for Voice Dialing, the phone should be set to

[*]/Earphone.

Record your entries in the phone before using the Voice Dial function in the

Hands Free mode. The hands free kit requires you to repeat new entries when

you are in Hands Free mode using Voice Dial.

Once you have recorded your entries using the hands free kit, you can use the

Voice Dial function in Hands Free mode.

canadaN370.book Page 97 Monday, May 20, 2002 2:57 PM

Advertising
This manual is related to the following products: