Samsung HT-DB400M - Manual (Page 44)

Setting the Test Tone
L: Front Speaker (L)
R: Front Speaker (R)
SW: Subwoofer
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
43
2 1
Press MENU button.
Press Cursor
button to move to
‘Audio’ and then
press ENTER button.
3
Press Cursor button
to move to ‘TEST
TONE’ and then press
ENTER button.
• The test tone will be sent to L ➝ R ➝
SW in that order.
If the button is pressed again at this
time, the test tone will stop.
To end the test tone,
press TEST TONE button.
Press TEST TONE button.
• Test tone will be produced as follows:
When playing a DVD or CD, this will work
only in Stop mode.
• Use this function to check that each speaker is
correctly connected and that there is no problem.
When manually testing using the TEST TONE button
Start
35P~54P(DB400M)-SEA 2004.3.18 4:55 PM Page 44