Samsung AK68-00956L/01 - Manual (Page 74)

ENG-74
V C R O P E R AT I O N S
2
Press the ›‚ buttons to
select VCR, then press the
Š or ENTER button.
n
3
Press the ›‚ buttons to
select Tape Length, then
press the Š or ENTER
button to select the correct
cassette length.
n
1
Press the MENU button on the
remote control.
4
Press the MENU button to exit.
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the
type of cassette inserted.
Note
This information is usually printed on the
tape box. The menu cycles through: T-120,
T-160 or T-180.
Once the type of cassette is set, the VCR
can display the amount of time remaining on
the tape when you press the INFO. button.