Sony SLVD380P - Manual (Page 38)

38 US Recording from a connected equipment using the timer
Recording from a connected equipment
using the timer
You can set the DVD-VCR to automatically
record programs from a connected cable box
or satellite receiver. To connect a cable box
or satellite receiver, see “Connecting a cable
box or satellite receiver” (page 16).
You can preset up to eight programs at a
time.
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR, TV and your cable
box or sattelite reciever.
• Set the TV to video input so that the signal
from the player appears on the TV screen.
• Set TV / DVD·VIDEO switch to
DVD·VIDEO on the remote.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
1 Press SELECT VIDEO to control the VCR.
2 Press TIMER.
The timer programming menu appears.
INPUT SELECT
V/v/B/b
ENTER
x STOP
CLEAR
TIMER
H PLAY
TV/VIDEO
O RETURN
SELECT VIDEO
TV / DVD·VIDEO
switch
Z