Sony KP 57WV700 EN - Manual (Page 94)

93
W
e
lc
ome
SETU
P
Oth
e
r I
n
fo
SETU
P
S
E
TU
P
SETU
P
Audio
Channels
Problem Possible Remedies
Good picture,
no sound ❏ Press MUTING so that Muting disappears from the screen (see page 48).
❏ Make sure the Speaker option is set to On in the Audio Menu (see page 75).
Cannot gain enough volume
when using a cable box ❏ Increase the volume of the cable box using the cable box’s remote control.
Then press
TV FUNCTION and adjust the TV’s volume.
Sound seems weak or
insufficient ❏ The TV’s audio might be set to Auto SAP or Mono , when it might be better set
to Stereo . In the Audio Menu (see page 74), set the MTS setting to Stereo . If
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external audio speakers ❏ If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to
adjust the sound (see page 74). Or, to use the TV remote control, set the
Audio Out option to Variable.
❏ To turn on the TV speakers, set the Speaker option to On (see page 74).
Problem Possible Remedies
Cannot receive upper
channels (UHF) when
using an antenna ❏ Change the Cable option to Off (see page 78).
❏ Use Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV’s memory (see page 78).
TV is fixed to one channel ❏ Use Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV’s memory (see page 78).
❏ Check your Channel Fix settings (see page 78).
Cannot receive any
channels when using
cable TV ❏ Use Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV’s memory (see page 78).
❏ Make sure the Cable option is set to On in the Channel Menu (see page 78).
Cannot receive or select
channels ❏ Use Auto Program in the Channel Menu to add receivable TV channels that
are not presently in TV memory (see page 78).