Samsung DVD-R125 - Manual (Page 32)

32 - English
You can connect the DVD Recorder to an external amp
or Home Theatre.
Allow you to setup the Audio device and sound status
depending on the audio system in use.
1 With the unit in Stop mode/No Disc mode,
press the MENU button.
2 Press the …† buttons to select Setup, then
press the OK or √ button.
3 Press the …† buttons to select Audio, then
press the OK or √ button.
Audio setup menu will be displayed.
4 Press the …† buttons to select the desired
audio option, then press the OK or √
button.
Setting up the Audio
Options
RETURN OK MOVE EXIT
Setup No Disc
System √ √
Clock Set √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
Install √ √
Programme
Setup
RETURN OK MOVE EXIT
Timer Record No Disc
Video Plus+ √ √
Timer Record √ √
Video Plus+ Extended : Off √ √
Programme
Setup
RETURN OK MOVE EXIT
Audio No Disc
Digital Output : PCM √ √
DTS : Off √ √
Dynamic Compression : On √ √
Programme
Setup
RETURN OK MOVE EXIT
Audio No Disc
Digital Output : PCM √ √
DTS : Off √ √
Dynamic Compression : On √ √
Programme
Setup
PCM
Bitstream
S
ystem Setup
4 Press the …† buttons to select NICAM,
then press the OK or √ button.
5 Press the …† buttons to select On or Off,
then press the OK or √ button.
• Off: Only set at this position to record the standard
mono sound during a NICAM broadcast if the stereo
sound is distorted due to inferior reception conditions.
• On: NICAM mode
RETURN OK MOVE EXIT
System No Disc
EP Mode Time : 6Hours √ √
Chapter Creator : Off √ √
Front Display : Bright √ √
NICAM : On √ √
DivX(R) Registration √ √
Programme
Setup
Off
On
Please use the Registration code to register this DVD
Recorder with the DivX(R) Video On Demand format.
To learn more, visit www.divx.com/vod.
DivX(R) Registration
00842A-R125-XEU_17~40 6/7/05 8:07 PM Page 32