Audio options, Setting up video output options, English – Samsung DVD-R125 User Manual

Page 33: System setup, Digital output, Video setup menu will be displayed

Advertising
background image

English -

33

5

Press the …† buttons to select the desired
item, then press the OK or √ button.

NOTE

Audio Options

Digital Output

1. PCM : Select this when you have no equipment that

can decode Dolby Digital (or MPEG-2) signal.
When you play Dolby Digital (or MPEG-2)
sound track, the digital output are converted to
PCM Stereo.

2. Bitstream : Output Dolby Digital (or MPEG-2) audio as

bitstream. Select this when your AV
receiver or AV amplifier have Dolby Digital
(or MPEG-2) Decoder.

Digital output setting is equally applied to
both Dolby Digital and MPEG-2 audio.
LPCM sound track is always outputted as
PCM. It has no relation with Digital Output
setting.

Be sure to select the correct Digital
Output or you will hear no sound or loud
noise.

NOTE

DTS

1. Off : Doesn’t output DTS signal.

Select this when your AV receiver or AV
amplifier does not have DTS decoder.

2. On : Outputs DTS Bitstream via digital output when you

play DTS track.
Select this only when your AV receiver (or AV
amplifier) have DTS decoder.

Dynamic Compression

This is only active when a Dolby Digital signal is
detected.
1. Off : You can enjoy the movie with the standard

Dynamic Range.

2. On : When Movie soundtracks are played at low

volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.

When DTS soundtrack is played, sound
does not output from AV Audio Output.

NOTE

Press the RETURN or œ button to return
to the previous menu.
Press the MENU button to exit the menu.

S

ystem Setup

You can enjoy high quality image through RGB or
Component video connections.

1

With the unit in Stop mode/No Disc mode,
press the MENU button.

2

Press the …† buttons to select Setup, then
press the OK or √ button.

3

Press the …† buttons to select Video, then
press the OK or √ button.

Video setup menu will be displayed.

Setting up Video Output
Options

RETURN

OK

MOVE

EXIT

Setup

No Disc

System

Clock Set

Language

Audio

Video

Parental Control

Install

Programme

Setup

RETURN

OK

MOVE

EXIT

Timer Record

No Disc

Video Plus+

Timer Record

Video Plus+ Extended : Off

Programme

Setup

RETURN

OK

MOVE

EXIT

Video

No Disc

TV Aspect

: 16:9 Wide

3D Noise Reduction

: Off

HDMI/DVI Resolution

: 576p

Video Output

: Component

Programme

Setup

00842A-R125-XEU_17~40 6/7/05 8:07 PM Page 33

Advertising
This manual is related to the following products: