Using the timer programming feature – Samsung V70 User Manual
Page 37
37
GB
The Timer Programming feature allows you to preset the DVD-VCR
to record a programme up to one month before that programme is
to be broadcast. Up to six programmes can be preset.
☛
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result:
The
TIMER PROGRAMMING
menu is displayed.
2
Press to select the input source.
3
Select the required station by pressing the
,
buttons or
INPUT SEL. to select the LINE1, LINE2 input sources.
4
Press to select the recording day.
5
Select the required day by pressing the
or
buttons.
6
Press to select the recording start time.
7
Select the required hour value by pressing the
or
buttons.
8
Press to select the minutes.
9
Select the required minute value by pressing the
or
buttons.
10
Press to select the recording stop time.
11
Select the required recording stop time by pressing the
or
buttons, following the same procedure as when selecting the
recording start time.
12
Press to select the recording speed.
13
Press the
or
buttons to select the
SP
(Standard Play),
LP
(Long Play),
Auto
(Auto Tape Speed Select) recording speeds.
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result:
Before starting recording, the DVD-VCR compares the
timer duration with the remaining time on the cassette.
➢
Auto Tape Speed Select. The DVD-VCR’s “Auto Tape
Speed Select” function compares the duration of the timer
recording to the actual recording time remaining on the
tape loaded. If there is insufficient tape to complete a
timer recording in AUTO mode, the DVD-VCR
automatically switches to LP mode to record the whole
programme.
Using the Timer Programming Feature
OPEN/CLOSE
STANDBY/ON
15
Standard
G-Code
Timer Method
VCR
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 37