Sony CMT-DH30 - Manual (Page 23)

CMT-DH3.GB.3-097-194-11(1)
 GB
G
etting S
tar
ted
Setting the clock
Use buttons on the remote to set the
clock.
1
Press /  to turn on the
system.
2
Press TIMER MENU  .
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the
display, press  or   repeatedly
to select “CLOCK SET?,” then press
ENTER  .
3
Press  or   repeatedly to set
the hour.
4
Press ENTER  .
The minute indication flashes in the
display.
5
Press  or   repeatedly to set
the minutes.
6
Press ENTER  .
The clock starts functioning.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the system
is off
Press DISPLAY  .
The clock is displayed for about
8 seconds.