Sony CMT-DH30 - Manual (Page 60)

CMT-DH3.GB.3-097-194-14(1)
60 GB
Tuner
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually
tuning in the station.
Listening to FM or AM
1
Press FUNCTION +/ 
repeatedly to select “TUNER FM”
or “TUNER AM” (or press TUNER/
BAND
 on the unit repeatedly
to select “FM” or “AM”).
2
Press and hold TUNING +/ 
until the frequency indication
changes and then release.
Scanning stops automatically when
a station is tuned in and “TUNED”
lights up in the display. When a FM
stereo program is tuned in, “ST”
lights up in the display.
If “TUNED” does not appear and
the scanning does not stop, press
TUNING +/  repeatedly to tune
in the station you want.
When you tune in a station that
provides RDS services, the station
name appears on the display.
(European model only)
3
Adjust the volume.
Press VOLUME +/  .
To stop automatic scanning
Press   .
To change the AM tuning interval
The factory setting for AM tuning
interval is 9 kHz (or 10 kHz, for some
areas, this function is not available on the
European and Russian models).
Use buttons on the unit.
1
Press TUNER/BAND  on the unit
repeatedly to select “AM.”
2
Press /  to turn off the system.
3
Press DISPLAY  to display the clock.
4
While the clock is displayed, hold
down TUNER/BAND  and then
press /  to turn on the system.
“AM 9k Step” or “AM 10k Step”
appears in the display.
When you change the interval, all the
AM preset stations are erased.