Sony CMT-DH30 - Manual (Page 93)

CMT-DH3.GB.3-097-194-11(1)
 GB
Additional I
nf
or
ma
tion
Precautions
Discs that this system CANNOT play
 Discs of non-standard shape (for example,
heart, square, star)
 Discs that have adhesive tape, paper, or
sticker attached to them
 Rental or used discs with attached seals
where the glue extends beyond the seal
 Discs that have labels printed using ink that
feels tacky when touched
Notes on discs
 Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
 Do not clean discs with solvents, such as
benzine thinner, or commercially available
cleaners or anti-static spray intended for
vinyl LPs.
 Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
 Do not use discs encircled with a protection
ring. This may cause a malfunction to the
system.
On operating voltage
Before operating the system, check that the
operating voltage of the unit is identical with
the voltage of your local power supply.
On safety
 The unit is not disconnected from the
AC power source (mains) as long as it is
connected to the wall socket, even if the unit
itself has been turned off.
 Completely disconnect the power cord
(mains lead) from the wall socket (mains)
if it is not going to be used for an extended
period of time. When unplugging the unit,
always grip the plug. Never pull the cord
itself.
 Should any solid object or liquid get into
the system, unplug the system, and have
it checked by qualified personnel before
operating it again.
 The AC power cord can be changed only by a
qualified service facility.
On placement
 Do not place the system in an inclined
position or in locations that are extremely
hot, cold, dusty, dirty, or humid or lacking
adequate ventilation, or subject to vibration,
direct sunlight or a bright light.
 Be careful when placing the unit or speakers
on surfaces that have been specially treated
(for example, with wax, oil, polish) as
staining or discoloration of the surface may
result.
 If the system is brought directly from a cold
to a warm location or is placed in a very
damp room, moisture may condense on the
lens inside the DVD player, and cause the
system to malfunction. In this situation,
remove the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
Continued
