Kodak EasyShare M1020 - Manual (Page 33)

Changing settings and more
www.kodak.com/go/support 27
Installing the software
Follow these directions to install the software CD that was packaged with your frame.
The CD contains the Kodak EasyShare software and the Kodak EasyShare digital
display software. While these software applications work well independently, both
applications work together for the best experience when working with your pictures
(see
page 17 ).
1 Close all software applications that are open on your computer (including
anti-virus software; see the anti-virus software manual for details).
2 Place the EasyShare software CD into the CD-ROM drive.
The Kodak EasyShare software Install Wizard opens on your computer screen.
3 If the Install Wizard does not appear, choose Run from the Start menu and type
d:\setup.exe where d is the drive letter that contains the CD.
4 Follow the on-screen instructions to install the software. Select Complete to
automatically install both the Kodak EasyShare software and the Kodak digital
display software. Or, click Customize to choose the applications you wish to install.
NOTE: When prompted, take a few minutes to electronically register your picture frame and software. To
register later, visit www.kodak.com/go/register .
5 If prompted, restart the computer. If you turned off anti-virus software, turn it back
on.
The software icon(s) appear on your desktop when the installation is complete.