Kenwood DPF-J9030 - Manual (Page 9)

9
Connecting to a Receiver or Amplifier
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Setting Up the 10-key Remote and Keyboard
10-key Remote
Keyboard
1Remove the cover. 2Insert two AA batteries. 3Close the cover.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
To load Batteries
÷ The batteries that came with your new CD changer are intended to
be used for operation checks and setup. Therefore, they may not
last as long as ordinary batteries. Consider replacing them as soon
as you have verified that the remote operates correctly.
÷ When the remote’s operating range gets shorter, replace both
batteries.
÷ Do not install the CD changer where direct sunlight or high-fre-
quency fluorescent lighting can shine directly into the remote
sensor. This can decrease the operating range of your remote.
÷ When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Remote Operating Range
If you use the remote outside of this range, the remote will not
operate correctly. As you use the remote, be aware of the following:
1Remove the cover. 2Insert two AA batteries. 3Close the cover.
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
÷ The batteries that came with your new CD changer are intended to
be used for operation checks and setup. Therefore, they may not
last as long as ordinary batteries. Consider replacing them as soon
as you have verified that the keyboard operates correctly.
÷ When the remote’s operating range gets shorter, replace both
batteries.
÷ Do not install the CD changer where direct sunlight or high-fre-
quency fluorescent lighting can shine directly into the remote
sensor. This can decrease the operating range of your keyboard.
÷ When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
Keyboard Operating Range
If you use the remote outside of this range, the remote will not
operate correctly.
As you use the remote, be aware of the following:
The 10-key remote operates in the following range:
D I S C S K I P
$ ›
&
^
o PUSH OPEN )
REPEAT
CONFIRM
DISPLAY
CONTINUOUS PLAY
RANDOM
DISPLAY
TIMER PLAY OFF ON
STANDBY POWER ON/STANDBY
30
°
30
°
REMOTE CONTROL UNIT RC-P0713
T U V
X Y Z
W / .
SPACE CHARAC. DELETE
–
SELECTOR. (
'
DISC SKIP
) MODE
SET /CLEAR /CHECK /P.MODE
POWER
DISC
DOWN UP 7 ENTER 6 CURSOR 4 ¢ 1 ¡ DOWN UP LEFT RIGHT CHARACTER
RANDOM DISPLAY
CONFIRM A B C
D E F G REPEAT BEST SELECTION.
3 2 4 H J K
L M N O
P Q R S
1
7 6 8 5
+10 0 +100 9
I
CONTINUOUS PLAY SUB OUT
MONITOR
6 m (20 ft.)
Infrared Remote Sensor
Infrared Remote
transmitter
D I S C S K I P
$ ›
&
^
o PUSH OPEN )
REPEAT
CONFIRM
DISPLAY
CONTINUOUS PLAY
RANDOM
DISPLAY
TIMER PLAY OFF ON STANDBY POWER ON/STANDBY
30 ° 30 °
REMOTE CONTROL UNIT RC-KB2
3 m (10 ft.)
The keyboard operates in the following range:
Infrared Remote Sensor
Infrared Remote
keyboard
To load Batteries