Kenwood KDC-126S - Manual (Page 9)

Tuner features
— 9 —
CLK ADJ AUTO AME SCAN AUD RDM REP M.RDM OFF
CRSC
LOUD
AM
FM/
CRSC ¢ 4
SRC 1 - 6 AUTO/
AME
ST indicator
Band display Preset station number Frequency display
AUTO indicator CRSC indicator
Selecting the station.
1 Select tuner source
Press the [SRC] button.
Select the "TUnE" display.
2 Select the band
Press the [FM] or [AM] button.
Each time the [FM] button is pressed it switches between the
FM1, FM2, and FM3 bands.
3 Tune up or down band
Press the [
4] or [¢] button.
During reception of stereo stations the "ST" indicator is ON.
Tuning
Choose the tuning mode.
Press the [AUTO] button.
Each time the button is pressed the Tuning mode switches as
shown below.
Tuning mode Display Operation
Auto seek "AUTO 1" Automatic search for a station.
indicator
Preset station "AUTO 2" Search in order of the stations
seek indicator in the Preset memory.
Manual — Normal manual tuning control.
Tuning Mode
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Press the [CRSC] button for at least 1 second.
Each time the button is pressed CRSC turns ON or OFF.
When it's ON, the "CRSC" indicator is ON.
CRSC (Clean Reception System Circuit)
KDC-3026_2026_226_126_U.S 2003.09.22 09:49 AM Page 9