Konica Minolta Magicolor 2400 - Manual (Page 27)

Media Types 21
Media Types
Before purchasing a large quantity of special media, do a trial printing
with the same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load it. For a list of approved media, refer to printer.konicaminolta.com.
Plain Paper
Use plain paper that is
„ Suitable for plain paper laser printers, such as standard office paper.
Note
Do not use the media types listed below. These could cause poor print
quality, media misfeeds, or damage to the printer.
DO NOT use plain paper that are
„ Coated with a processed surface (such as carbon paper, digitally gloss-
coated media, and colored paper that has been treated)
„ Carbon backed
„ Unapproved iron-on transfer media (such as heat-sensitive paper,
heat-pressure paper, and heat-press transfer paper)
„ Cold-water-transfer paper
„ Pressure sensitive
„ Designed specifically for inkjet printers (such as superfine paper, glossy
film, and postcards)
„ Already been printed on by another printer, copier, or fax machine
„ Dusty
„ Wet (or damp)
"
Keep media between 35% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
„ Layered
Capacity Tray 1 Up to 200 sheets, depending on the paper
weight
Orientation Face up
Driver
Media Type
Plain paper
Weight 60 to 90 g/m² (16 to 24 lb bond)
UG2400W_UK.book Page 21 Thursday, November 11, 2004 12:16 PM