Kathrein UFS 710si - Manual (Page 71)

71
SERVICE MENU
Select the “Service” menu using the menu button

, the

buttons on the main menu and .
The following display appears:
Current software version
Channel list status
Last update run
UPDATE SOFTWARE
Hardware version
Use the

buttons to select from the displayed options and press to confi rm your selection:
• “Load in standby”: When the receiver is switched to standby mode the new software is loaded
• “Remind later”: The message reappears the next time the receiver is started up
• “Don’t load”: The software is not loaded and the download must be launched manually.
To load the software manually:
Use the

buttons to switch to “Software Update” and then press . The following display appears
(next page):
The receiver checks in standby mode whether a new software version is available and, if it is, displays the
following message the next time the receiver is started up: