Konica Minolta TWIN Driver - Manual (Page 18)

Installing the TWAIN driver 2
TWAIN Driver 2-7
4
When the Completed Found New Hardware Wizard dialog box ap-
pears, click the [Finish] button.
This completes the installation of the TWAIN driver.
The Found New Hardware Wizard appears again, and the installation
of the printer driver begins.
5
Repeat steps 1 through 4 to install the printer driver.
Installing using Plug and Play on Windows Vista
2
Note
If the driver is installed using Plug and Play, first the TWAIN driver is in-
stalled, and then installation of the printer driver begins. The procedure
described in this manual is for the installation of the TWAIN driver, then
the printer driver. For details on the printer driver, refer to the User’s
Guide for the GDI printer driver or for image controller IC-206.
Follow the instructions of the Found New Hardware wizard, and then click
complete the installation.
1
In the Found New Hardware wizard, select “Locate and install driver
software (recommended)”.
– If the User Account Control dialog box appears, click the [Continue]
button.
– If a message appears, requesting confirmation to search online,
click the [Don’t search online] button.