Konica Minolta TWIN Driver - Manual (Page 39)

Driver settings 4
TWAIN Driver 4-4
Scan Type
From the “Scan Type” drop-down list, select either “Push Scan” or “Pull
Scan”.
-
Pull Scan: With this scanning method, clicking the [Scan] button in the
driver starts scanning.
- Push Scan: With this scanning method, pressing the [Start] key on the
machine’s control panel starts scanning.
Duplex Scanning
Select “OFF” or “ON” from the drop-down list.
2
Note
The “Duplex Scanning” is appears only if optional reverse automatic doc-
ument feeder DF-605 is installed.