Konica Minolta TWIN Driver - Manual (Page 48)

Error messages 5
TWAIN Driver 5-7
Other machine errors
Computer display message:
2
Note
The network cable can be used only when the optional network interface
card NC-503 or image controller IC-206 is installed.
Cause Remedy
The automatic document feeder or the mis-
feed-clearing cover is open while a document
is being scanned from the automatic docu-
ment feeder. Refer to the User’s Guide.
When the misfed paper is removed, the
memory size (percent) returns to its original
value.
There may be problem with the transmission
of commands between the TWAIN driver and
the machine. Check the USB cable and network cable
connected to the machine.