Kodak EasyShare 300 - Manual (Page 8)

2 www.kodak.com/go/support
Getting started
Connecting and turning on the power
RISK OF ELECTRIC SHOCK:
Use only the AC power adapter included with your photo printer. Other adapters or
cords can damage your camera, photo printer, or computer.
1 Connect the AC power cord to the AC power
adapter, then to the back of the photo printer.
NOTE: The AC power cord included with your photo printer may not
require assembly, and may be different from the one shown.
2 Plug the AC power cord into a power outlet.
3 Press the On/Off button, , to turn the power on.
The photo printer initializes and the On/Off button
glows steady green.
Turning the power off
To turn the power off, press and hold the On/Off button for two seconds.