Replacing the printhead – Kodak 5.1 User Manual
Page 95
Advertising
www.kodak.com/go/aiosupport
89
KODAK HERO 5.1 All-in-One Printer
Replacing the printhead
IMPORTANT:
Replacing the printhead is not a regular maintenance procedure. Replace
the printhead only if you receive a new printhead from Kodak.
1. Make sure the printer is on.
2. Lift the access door, and wait for the carriage to move to the access position.
3. Remove both ink cartridges and set them aside.
Advertising
This manual is related to the following products: