KVH Industries TracPhone F55 - Manual (Page 42)

Data Calls Getting Started
routed to a specific RJ11 connector and not the 4-wire
handset.
3. The user may also choose to do nothing. After a certain
time the notification stops and the pre-emption of the
MPDS connection is implicitly rejected, if no other lines
have accepted the notification.
Configuration of the Call Waiting notification is described in
paragraph 4.4.24.
3 3.4.3 9600 Data Connection
9.6 kbps data is a circuit switched service, i.e. you have
the 9.6 kbps speed all the time, and you pay for the time
you are connected. This service will be the most economic
solution for batch data transfers.
The connection can be established manually. In windows,
open Dial-Up networking and double click the appropriate
icon. Enter username and password if necessary. Click
‘Connect’. Wait for the connection to be completed,
indicated by a ‘Dial-up Networking’ icon in the task bar
tray.
To disconnect: Right click the tray icon and choose
‘Disconnect’.
See section 5.2.2 on how to setup the computer and
transceiver for a 9.6 kbps data connection.
May 2005 31