Kenwood DPC-782 - Manual (Page 2)

DPC-981/782/781 (En/M)
1 Enter the stop mode.
2 Press the 7 key.
Pressing the REPEAT key in the play or stop mode allows you to
enjoy various playback features.
Press the REPEAT key.
Each press switches the repeat modes as follows.
1 Cancelled position
Returns to the normal play
mode.
2 One-track repeat
The track being played or
selected track will be
played repeatedly.
3 All-track repeat
All tracks on the disc will
be played repeatedly.
4 Shuffle play
All tracks on the disc will
be played in a random or-
der.
Various playback features
Track selection by track skip
• The same number of tracks as the times the key is pressed can
be skipped.
• When the 4 key is pressed once during playback, the played
position returns to the beginning of the current track being
played.
Fast forward, fast reverse
D.A.S.C.
L L A
D.A.S.C. SHUF
F U H S
Compensation of low frequencies
The low frequencies sound which is felt in headphone can be
boosted.
Each press of the key switches the mode as follows.
1 Bass Boost 1
Low frequencies are
boosted.
2 Bass Boost 2
Low frequencies are
boosted more than Bass
Boost 1.
3 Bass Boost OFF
Normal tone reproduc-
tion.
Indicator goes off.
D.A.S.C. 2 B.BOOST
3 2 8 4 0 1
D.A.S.C. 2
3 2 8 4 0 1
Set to the left side.
The operation keys of the main unit except for the volume
control are defeated.
This position prevents undesired operation when the unit is
put in a bag, etc.
Note on the key operation
Programming tracks in desired order
Desired tracks can be played in the desired order.
Preparations
1
Press the P.MODE/SEARCH key.
2
Select the desired track numbers in
the order you want to play them.
1 Select a track...
3
Start playback.
• Enter the stop mode by pressing the 7 key while playback.
• Select other tracks in the desired order by repeating 1 and 2
above.
• Up to 32 tracks can be programmed at a time.
Programmed order
2 And enter it.
Track number blinks
during selection.
D.A.S.C. PGM
1 0 _ P 3 0
1 Ensure that the unit is in stop mode.
2 Display the content to be changed.
• Press the P.MODE/SEARCH key repeatedly until the pro-
grammed order containing the track number to be changed is
displayed.
(2) And enter it.
3 Change the track number.
(1) Select a track...
Programmed
order Track number
To change a programmed content
D.A.S.C. PGM
4 0 _ P 7 0
To check the programmed contents
1 Ensure that the unit is in stop mode.
2 Press the P.MODE/SEARCH key.
• Each press of the P.MODE/SEARCH key displays the next
track number in the programmed order.
• Opening the lid cancels the program.
Press once
Programmed
order Track number
D.A.S.C. PGM
4 0 _ P 5 0
To clear the program
1 Ensure that the unit
is in stop mode.
2 Press the 7 key.
A
A
P.MODE/
SEARCH
B
A
A
REPEAT
C
B.BOOST
H
HOLD
J
P.MODE/
SEARCH
B
D.A.S.C. PGM
1 0 _ P
Lights.
D.A.S.C. PGM
1 0 _ P 3 0
A
A
D
P.MODE/
SEARCH
B
A
A
D.A.S.C. PGM
4 0 _ P 3 0
P.MODE/
SEARCH
B
D.A.S.C. PGM
4 0 _ P 3 0
P.MODE/
SEARCH
B
E
P.MODE/
SEARCH
B
To skip
forward
To skip
backward
Hold the key pressed during playback.
To skip
backward
To skip
forward
Skipping to or searching a desired track
1 Press the P.MODE/SEARCH key.
Perform the following procedure during playback.
• Go to the next step within 5 seconds.
2 Press the 4 or ¢ key.
Changing the tone
Hold facility
To skip
backward
To skip
forward
D.A.S.C.
F F b F 0 1
Fast
reverse
Fast
foward
• Playback resumes from the position where the key is released. • Be sure to release the switch before performing any opera-
tions. Operations cannot be performed if it is in the HOLD
position.
D.A.S.C.
F F O
D.A.S.C.
E
U
O
D.A.S.C. PGM
1 0 _ P 3 0
D.A.S.C.
3 2 8 4 0 1
• The REPEAT key may sometimes be invalid if it is pressed near
the end of a track. In this case, press the REPEAT key after
playback of the current track has completed.
• In case shuffle play is selected during playback, the playback of
the selected mode starts after the current track being played
has completed.
• The repeat of 2 or 3 above stops after 16 times of repeats.
D.A.S.C. 1 B.BOOST
3 2 8 4 0 1
Goes off.