Kenwood KRF-V6020 - Manual (Page 9)

9
Preparations
KRF-V7020/V6020/V5020 (En/T)
FM
75 Ω
GND
AM
ANTENNA
VIDEO 2 / MONITOR
REC OUT PLAY IN
VIDEO 1
VIDEO 2 FRONT
DVD 6CH. INPUT
SURROUND
CENTER
SUB
WOOFER
PLAY IN
VIDEO 1
VIDEO 2
VIDEO OUT VIDEO IN
MONITOR
Connecting video components
Video inputs and outputs
(Yellow RCA pin cords)
Setting up the system
Video deck
DVD player or LD player
Monitor TV
OUT
IN
OUT
Connecting DVD 6-channel jack
VIDEO 2 FRONT
DVD 6CH. INPUT
SURROUND
CENTER
SUB
WOOFER
6CH. INPUT
VIDEO 1
VIDEO 2
VIDEO OUT VIDEO IN
MONITOR
OUT
IN
OUT
Audio inputs and outputs
(Red and white RCA pin cords)
Video Inputs
(Yellow RCA
pin cord)
VIDEO IN
SUBWOOFER
SURROUND
VIDEO OUT
FRONT
CENTER
DVD player equipped with
six channel output jacks, etc.
Connecting the antennas
Antenna terminal connections
1 Push lever. 2 Insert cord.
AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible from
the receiver, TV set, speaker cords and power cord, and adjust the direction
for best reception.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75
Ω
coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75
Ω
terminal.
3 Return lever.
AM loop
antenna
FM indoor antenna
FM outdoor antenna
Use an antenna adaptor
(Commercially available)
The sound input to DVD 6CH. INPUT is paired with the video signal
input to 6CH. INPUT.
VIDEO 2 FRONT
DVD 6CH. INPUT
SURROUND
CENTER
SUB
WOOFER
6CH. INPUT
VIDEO 1
VIDEO 2
VIDEO OUT VIDEO IN
MONITOR
Multi-channel surround
processor
DVD player
SUBWOOFER SURROUND VIDEO OUT
FRONT
CENTER
Even if your DVD player does not
have the 6-channel output facility,
you can enjoy the 6-channel audio
by connecting a multi-channel
surround processor to your DVD
player.