Konica Minolta BIZHUB 210 - Manual (Page 112)

4 Making copies
4-8 bizhub 162/210
Loading paper Into the 2nd paper tray
Load paper into the 3rd, 4th and 5th paper trays using the same procedure
described below.
1
Pull out the 2nd tray.
2
Press down on the paper-lifting plate
until it locks into place.
3
Load the paper into the tray.
? Have the necessary precautions
been observed when loading the
paper?
% Do not load so much paper that
the top of the stack is higher than
the
, mark.
4
Slide the paper guides against the
edges of the paper.
? Is the paper guide positioned
correctly?
% Make sure that the paper guides
are pushed up against the edges
of the paper.
Paper-lifting plate