Replacing the toner bottle, Replacing the toner bottle -4 – Konica Minolta BIZHUB 210 User Manual
Page 214
Advertising
8
When a message appears
8-4
bizhub 162/210
Replacing the toner bottle
1
Open the front cover.
2
Swing out the toner bottle holder,
and then remove the toner bottle.
3
Holding the sealed end of the new
toner bottle up, slowly peel off the
seal toward you.
?
Have the necessary precautions
been observed when peeling off
the seal?
% Since some toner may spurt out
while the seal is being peeled off,
be sure to peel off the seal slowly.
4
With the side of the toner bottle
marked “UP” facing up, insert the
toner bottle into the toner bottle
holder.
?
Have the necessary precautions
been observed while inserting the
toner bottle?
% As shown at the right, the tab on
the toner bottle should securely fit into the notch in the toner bottle
holder.
Advertising
This manual is related to the following products: