Kenwood M1GD50 - Manual (Page 21)

English 1
2
Select "Settings".
3
Select "Sound mode".
4
Select the desired sound mode.
The display during playback resumes in
about 30 seconds.
Adjusting the audio
• If the headphone volume is increased too much, you will be unable to hear the sounds from
outside. Be careful not to increase the volume too much.
• With the default condition set at the factory, Sound mode is set to "Normal".
• Press the Menu button to return to the previous display page.
Adjusting the audio
Adjusting the volume
Adjust the listening volume as follows.
1
Select the volume level.
(side)
Pressing and holding a button segment varies the
volume gradually.
Selecting the sound effects
Select one of the 7 modes.
Normal Playback in normal tone.
Bass/ Pops/
Rock/ Jazz/
Dance/ Voice Playback in a tone matching the genre of music.
1
Open the home screen.
The home screen opens.