Kodak ESP 9200 - Manual (Page 50)

Copying
44 www.kodak.com/go/aiosupport
Copying a photograph
You can copy a photograph using the default settings, or you can make adjustments
to the quantity, size, quality, and brightness of your copies.
Using the default settings to copy a photograph
The default settings are either the factory default settings (see Resetting factory
defaults, page 76 ), or defaults that you have set on the printer (see Save as Defaults,
page 45 ).
To copy a photograph using the current default settings:
1. Place the original photograph face down on the scanner glass.
2. Press Home .
3. Press to select Copy Photo .
4. Press Start Black to make a black-and-white copy, or press Start Color to make a
color copy.
Adjusting the settings and copying a photograph
To copy a photograph using settings other than the default settings:
1. Place the original photograph face down on the scanner glass.
2. Press Home .
3. Press to select Copy Photo , then press OK .
4. Press to select an option, then press or to change the setting.
Copy Photo Option Settings Description
Quantity 1 (default) to 99 The number of copies that print.
Tray Selection Top Tray (default) Copy is made on the paper in the top
tray.
Bottom Tray Copy is made on the paper in the
bottom tray.