Konica Minolta DI3510 - Manual (Page 122)

7
Utility Mode Operations
7-6 Di2510/Di3010/Di3510
7.3 Changing Default Settings
The procedures for changing each of the User’s Choice settings are
described below.
To set the “Memory Recall” function
This function is used to specify whether or not the last image copied can
be recalled and printed again.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [1/6], and then touch
[Memory Recall].
4
Touch [ON] or [OFF], and then
touch [Enter].
❍ If [ON] is selected, the
previously copied image data
can be printed again, even after
copying has finished or while the
copier is stand-by.
5
Touch [END] to return to the Utility
screen, and then touch [Exit] to return to the Basics screen.