To set the “printing density” function, To set the “printing density” function -23 – Konica Minolta DI3510 User Manual
Page 139
Advertising
Utility Mode Operations
7
Di2510/Di3010/Di3510
7-23
To set the “Printing Density” function
This specifies the default printing density level settings from -2 to 2, in 5
steps.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [4/6], and then touch
[Printing Density].
4
Select the desired settings, and
then touch [Enter].
5
Touch [END] to return to the Utility
screen, and then touch [Exit] to
return to the Basics screen.
Advertising