Konica Minolta DI3510 - Manual (Page 162)

8
Administrator Management Operations
8-6 Di2510/Di3010/Di3510
8.3 Administrator Settings
Changing the administrator access code
This explains the method to specify or change the administrator access
code.
To set the administrator access code
1
Follow the procedure described in
“To display the Administrator
Management screens” on page 8-1 to display the Administrator
Management screen.
2
Touch [Admin. 1], and then touch [Admin. Set].
3
Touch [Administrator Code Input].
4
Touch [Current Code], and then use
the 10-Key Pad to type in the
currently specified 8-digit
administrator code (Admin.
Password).
❍ Press the [C] key to erase all
entered text.
❍ To return to the previous screen,
touch [Cancel].
✎
Note
If the entered administrator code is incorrect, the message
“Incorrect code and new administrator. Input administrator code.”
appears. Type in the correct administrator code.
When the “Get Penalty” function is set to “ON”, incorrectly typing
the administrator code is counted as an incorrect attempt to access
the machine. After three incorrect attempts, the Utility screen is
displayed, access to Administrator mode is denied, and the
administrator code (administrator password) will not be accepted.